Faculty Profile

I was instrumental in setting of different communication and instrumentation laboratories. I have also got opportunities to organized IEEE workshop, seminars, expert lectures, FDPs and Industrial trips for the students/faculty members. I was also involved very actively in various activities of the college. I have also developed and applied proposals for MSME and AICTE

M.Tech. (Instrumentation and Control) from ZHCET, AMU, Aligarh (U.P.) with Honors’ in 2006.

An education isn't how much you have committed to memory, or even how much you know. It's being able to differentiate between what you do know and what you don’t.

Education give us pause that so many people who have made their mark in the world of ideas, who have been acknowledged leaders and innovators, have held formal education and educational institutions in low regard. We have collected here a variety of thought-provoking observations on education.

My professional journey includes a mix of teaching, industry and research. Foreign exposure gave me immense confidence and also I understood the importance of higher study.

 I did my P.G. in VLSI Design from ‘Anna University’ & U.G. from ‘IETE’ in Electronics & Telecommunication. Besides the research work on a CSIR project I taught in many reputed colleges like ‘BIT Sathyamangalam’ Tamilnadu, CAHCET, SCT Tamilnadu and ‘SVC Alwar Rajashthan’.

I have presented various papers and have got training on various domains in institutes and industries in India as well as abroad. Finally I joined “Dronacharya College of Engineering”, Greater Noida on 2nd September, 2011.

B.E. (ECE) from IET Alwar (Rajasthan) secured 72% marks in 2004.

Education the powerful tool of all is the best way to impart intelligence among people. There is no doubt that education is the only way to eradicate the social evils in the world. It should be provided not only for business but also for the sake of imparting technical excellence. Technical education is an important aspect to be followed in the present scenario.

Technical teaching is very important in the education irrespective of the domain. So it is clear that technical excellence is important in the current process as it is the tool to emerge as intellectuals. This type of teaching provides both knowledge and skill improvement for the learners.

I started my professional education, B.Tech.in Electronics & Communication branch from VTU. After successful completion of B.E, I did my M.Tech in “VLSI and Embedded Systems” from VTU, Belgaum. I had done my thesis under the guidance of Dr. Kurahatti N.G. My thesis was “Design of MAC 10Gb Ethernet Transmit Engine”

I started my professional carrier by joining KLE Institute of Technology, Belgaum. After that I Joined Dronacharya College of Engineering in March 2011 to serve it to the best of my knowledge and skills and provide proper guidance to the students so that they will be aware of their responsibilities towards the country and society. DCE provided me opportunity to interact with young engineering students and I am very thankful for it.

Education the powerful tool of all is the best way to impart intelligence among people. There is no doubt that education is the only way to eradicate the social evils in the world. It should be provided not only for business but also for the sake of imparting technical excellence. Technical education is an important aspect to be followed in the present scenario.

Technical teaching is very important in the education irrespective of the domain. So it is clear that technical excellence is important in the current process as it is the tool to emerge as intellectuals. This type of teaching provides both knowledge and skill improvement for the learners.

I started my professional education, B.Tech. in Electronics & Instrumentation branch from Uttar Pradesh Technical University, Lucknow. After successful completion of B.Tech, I had cleared GATE exam with 99percentile which provided me further path of Study and decided to go for M.E/M.Tech. I took admission in one of the best engineering institute of our country “Punjab Engineering College”, Deemed University, Chandigarh in “Electronics Product Design and Technology” branch. I also worked in the college as placement member and class representative. As the college has collaboration with CDAC Mohali, I had done my thesis under the guidance of director CDAC Mohali. I made a product named “Fingerprint Based Medical Information System” during my thesis which will be seen in government hospitals very soon. I have also attended and took part in organised Conferences on “Wireless Optical Communication" in PEC, Chandigarh.

I started my professional carrier by joining “Dronacharya College of Engineering” on 1st Feb. 2011 to serve it to the best of my knowledge and skills and provide proper guidance to the students so that they will be aware of their responsibilities towards the country and society. DCE provided me opportunity to interact with young engineering students and I am very thankful for it.

I did my M.Tech in Signal processing from Ambedkar Institute Of Technology with (AIT) 85% & B.Tech with 75% from Indira Gandhi Institute Of Technology in Electronics & communication in 2005 under Guru Gobind Singh IP university(Delhi).

My M.Tech major project thesis is on designing and realization of third order OTA – C filters using current mode linear transformation (CMLT) techniques in 180nm. Based on systematic design methods, we can synthesize current mode high -order all pole filters with minimum number of MOOTAs and all grounded capacitors. Moreover, high-frequency CMLT elliptic filter can also realized by adding capacitors to the relative all-pole filter, although floating capacitors are needed. Fully differential current-mode third order Chebychev and elliptic filters are implemented in 180nm CMOS technology. Furthermore, the presented circuits can be extended to higher-order filters.

The various other projects implemented in M.Tech are third order Butter worth Low pass current mode OTA-C filters with 120MHz and band gap reference circuit 180nm CMOS technology.

My area of interest is Analog Electronics, Image Processing, VHDL and Speech processing. I am exposed to various softwares like XILINX 8.1, MATLAB, Tanner tools 11, x circuit and PSPICE.

Teaching is my passion and helps the students by counseling them. I feel lucky that I have got the chance to contribute towards building the country by giving right track to the students.

I have participated in activities like organization of Technical events and cultural programs. Another area of interest is poem writing and one of my poems published in AIT magazine.

I have taught in many reputed colleges like ‘Northern India Engg. College’ under GGSIPU, Delhi and ‘PCCS, Greater Noida’.

I have attended various National conferences on latest trends in VLSI and LASER and faculty development program organized by AIT on VLSI and have got training on VIRTUAL LABS (Basic Electronics, Digital Electronics, Microwave) by IIT D at NIEC.

I joined “Dronacharya College of Engineering”, Greater Noida on 3rd Oct. 2011 as an Assistant Professor in ECE deptt.

“Education is the backbone of society”. I personally believe that education is the essential base of a good life and is so vast and huge in its scope that it can be huge in its scope that it can change the way an individual thinks and performs. Not only does it separate a human being from the class of animals but it also uplifts a person morally, socially and economically. I believe, students of today will live in a different future and we must prepare them to confront new challenges. For this a strong and effective education system is essential to both the survival and prosperity of a democratic society. And I also believe that collaboration between the home, the College, and the community has a direct correlation to the quality of the educational system and the experience of each student.

I am working as Assistant Professor in Electronics and Communication Engineering Department at Dronacharya Group of Institution, Greater Noida. My early education and learning particularly, which I received from my parents and primary education provided me ethical sense on my personality and vision. My higher education has provided me with immense confidence and preservance. After completion of Bachelor of Technology in “Electronics and Telecommunication Engineering” I did my Master of Technology in “Signal Processing” from Maharshi Dayanand University, Rohtak with first division.

I joined this Institute on 23rd July, 2007 to serve it with my best. I have 3 years of industrial experience and more than 5 years of teaching experience. I published 2 papers in different reputed conferences. I have lifetime professional membership of ISTE, IETE, ISOC and IAENG. I have attended several workshop and seminars. I have played important role to set up the different laboratories of Electronics and Communication Engineering as well as Electrical and Electronics Engineering. Also I have been awarded as “Best Academic Staff” for 2009-10. I feel that DGI will provide me with a platform from where I can not only contribute to our society but also help my country by shaping the future of our young Engineers, who are not only awakened to make their future but also aware of their responsibilities towards their fellow citizens.

In this fast world, education is a necessary element to move forward and succeed in life. As technology advances day by one should have in depth knowledge about all the upcoming new technology to make life simpler and better.

Early education that we get in school improves our personally and the education after our school, get us more close to the real world. Engineering is a field where one can get deep inside the technology world each of the part of our daily life. I have completed my B.Tech in Electronics and Communication from DRIEMS, Orissa in 2007 and M.Tech in Mechatronices from Vellore Institute of Technology, Vellore, Tamil Nadu in 2010, I have done one year industry project from Veethree Indication Instruments Ltd, Faridabad where I got to know real time application of electronics in mechanical field.

Now I got an opportunity to work in DCE, Greater Noida and I am sure that I will be able to enhance the knowledge to young and future engineers of our country.

I, Semanti Singh (Gold Medalist), have done my B.Tech from N.I.T Kurukshetra (1999). I am throughout scholarship holder. I have got 6 and half years of work experience including industry and academics.

I worked as Software Developer in Tata Consultancy Services (TCS). As a software developer my responsibility includes management of team member, development of software, testing. I worked with various clients like General Motors, Walgreen’s, GE Electrical at different locations United States of America, Gurgaon and Noida. I also worked as lecturer in Maullana College of Engineering.

I started my professional carrier by joining the Institution on 24th Sept, 2009 to serve it to the best of my knowledge and skills and provide proper guidance to the students so that they will be aware of their responsibilities towards the country and society. DCE provided me opportunity to interact with young engineering students and I am very thankful for it.

“You can teach a student a lesson for a day; but if you can teach him to learn by creating curiosity, he will continue the learning process as long as he lives”

I Jaspinder Kaur did my M.Tech (ECE) from Deen Bandhu Chottu Ram University, Murthal in ECE and secured 8.66 CGPA. I did my B.Tech (ECE) from S.K.I.E.T. Kurukshetra in ECE and secured 70% marks. I have more than 3 years experience. I worked in N.C.C.E. Israna (Panipat) & Doon Valley Institute of Engg. & Technology (Karnal) from 2nd August, 2007 to Feb, 2012. Now am associated as an Assistant Professor in ECE Deptt. with Dronacharya Group of Institutions Greater Noida on 6 Aug, 2012.

I consider myself to be a responsible, creative and punctual person. I accept the challenges & goals of the organization. I have the ability to handle the interpersonal relationships, to work in team and to work under high pressure which in turn keeps me motivated when I achieve my targets. I believe in setting up my own standards and beating them up.

I introduce myself as a professional Electronics Engineer. I cleared a MP pre engineering test (MP-PET) with 120th rank in MP. I started my professional education, B.E. in Electronics & Telecommunication branch from SGSITS, Indore in 2005 with 74.04%. After successful completion of B.E, I have been selected in TCS through college campus and then joined TCS. I had cleared GATE 2007 and GATE 2012 exam with 92.6 and 98.91 percentile respectively which provided me further path of Study and decided to go for M.E/M.Tech. I took admission in MITS, Gwalior in 2009 in “Communication, Control and Networking” branch. I completed my M.E. from MITS, Gwalior in 2009 with 84.67% (Gold medalist in M.E). After a successful completion of my post graduation, I started my professional carrier by joining MITS college from 2009 to 2011 (2 year experience), then in SRCEM, Banmor from July 2011 to December 2011.

I joined Dronacharya Group of Institutions on 6th August 2012 to serve to the best of my ability, availability and skills. Self-determination and devotion towards achieving the goal with structured and time bounded approach. Flexible according to environment leading to development of group task approach and leadership qualities.

“Education has the power to enlighten and shape our perspective on the world around us and on life in general. It is with this virtue in mind that I have believed in strong level of higher education in our country”.

I Sandeep Dogra Assistant Professor in Electronics & Communication Department, I did M.Tech in ECE in (Digital and wireless Communication) from Indraparstha University, Delhi. And completed my B.Tech in ECE from Guru Gobind Singh Indraprastha University Delhi. I have attended various professional trainings, industrial training, project & Seminars, His areas of interest lies mainly in Digital Communication, DSP Computer Networks, Signal & System Microwave & Radar, Optical Communication, and Satellite Communications.

I joined Dronacharya Group of Institutions on 18th Jan 2013, as an Assistant Professor in Electronic & Communication Engineering Department. Icontributed high power learning environment where students can contribute to the society and help our country for shaping a better future.

I did my B.Tech from Krukshetra University JMIT Radur with ECE as my specialization which gave me a way to choose my career which not only inspired me but also gave me a platform to prove myself in various activities I did my Post Graduation (M.Tech) from Krukshetra University NC College Israna which gave me a path to reach my destination, and I also did PGDIT from Symbiosis Institute, Pune. I indulged in various activities related to research in the institute as I have attended no of workshops and presented my papers in conferences and journal which helped me a lot in getting a job. I am committed Assistant Professor with over 5+ years of experience at leading academic institutions teaching students from various social and cultural backgrounds.

So now I am joining Dronacharya Group of Institutions hope this would be my great experience and will always remain in my memories. I will do my work with full dedication and make each and every effort to shape future of upcoming young engineers in society.