Admission Helpline - +91-9910380115

Faculty

Dr. Sunil Kumar Sharma (HOD)

sunilkumar.sharma@gnindia.dronacharya.info

Ph.D. from Indian Institute of Technology (ISM), Dhanbad

Specialization in Thermal Engineering

View Details

Educational Qualification:

  • Ph. D. awarded in Mechanical Engineering from Indian Institute of Technology (ISM), Dhanbad, India in 5th September 2017.
  • M. Tech in Petroleum Engineering from ISM Dhanbad, Jharkhand, in the year of 2009.
  • B. Tech in Mechanical Engineering from Pt Ravi Shankar Shukla University, Raipur.

Experience (Academics):

  • Presently working as Associate Professor in the Department of Mechanical Engineering, Dronacharya Group of Institutions, Greater Noida, India, with responsibility of Head of the Department from 20th July 2020.
  • Worked as Assistant Professor in the Department of Mechanical engineering at DIT University, Dehradun from 26 December 2016 to 4th July 2020.
  • Worked as Assistant Professor in the Department of Mechanical Engineering at Manav Rachna International University, Faridabad from 08.02.2011 to 15.07.2012.

Experience (Industry):

  • Worked as Assistant Plant Engineer in BEML (A PSU under ministry of defence, Govt. of India), KGF, Karnataka, in the section of Quality and Testing.

Paper Presentation/Publication:

  • Nalgundwar, A., Paul, B. and Sharma, S.K., 2016. Comparison of performance and emissions characteristics of DI CI engine fueled with dual biodiesel blends of palm and jatropha. Fuel, 173, pp.172-179.
  • Sharma, S.K., Das, R.K. and Sharma, A., 2016. Improvement in the performance and emission characteristics of diesel engine fueled with jatropha methyl ester and tyre pyrolysis oil by addition of nano additives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 38(7), pp.1907-1920.
  • Das, R.K. and Sharma, S.K., Fuel characterization and performance parameters analysis of diesel engine using blends of palm biodiesel and tyre pyrolysis oil. Journal of the Brazilian Society of Mechanical Sciences and Engineering, pp.1-7.
  • Paswan, Bhola K., Rajat Jain, Sunil K. Sharma, Vikas Mahto, and V. P. Sharma. "Development of Jatropha oil-in-water emulsion drilling mud system." Journal of Petroleum Science and Engineering 144 (2016): 10-18.
  • Das, R.K. and Sharma, S.K., 2017. Blend of jatropha biodiesel and tyre pyrolysis oil mixed with cerium oxide–an alternative to diesel fuel. Biofuels, pp.1-6.
  • S K Sharma, R K Das, R Kumar, “Performance Parameter Analysis Of Diesel Engine By Using A Mixture Of Diesel, Jatropha Oil, Mno Nanomaterial And A Suitable Antioxidant -A Review” International Journal of Mechanical and Production Engineering, ISSN: 2320-2092,Volume- 1, Issue- 6, Dec-2013
  • Review on fabrication and characterization of copper metal matrix composite (CMMC), doi: 10.1063/1.5058254
  • Stastical analysis of dry sliding wear and friction behavior of Cu/SiC sintered composite, doi: 10.1063/1.5058255
  • Participated actively in Golden Jublie Cum International Conference in ISMU Dhanbad 2008.
  • Research paper presented, IRAJ-International Conference on computer Science and Mechanical Engineering (IRAJ- ICCSME-2013) on 1st December, 2013 at Pune.
  • MENTCA’18, Statistical analysis under dry sliding conditions for Cu Sic composite.

Area of Interest:

  • Alternative Fuels
  • Unconventional energy source
  • I C engine
  • Waste Management
  • Nano Additives

Other Academics Services:

  • Reviewer of the following International Journals
    • Journal of the Brazilian Society of Mechanical Sciences and Engineering,
    • Fuel

Professional Memberships:

  • Member of IAENG (International Association of Engineers)

Special Competence:

  • GATE Qualified 2008
  • GATE Qualified 2007

Mr. Vineet Kumar Mishra (Registrar)

vineetkumar.mishra@gnindia.dronacharya.info

Studying Ph. D. from IIT Dhanbad

Specialization in Mechanical Engineering

View Details

Educational Qualification:

  • Pursuing Ph. D. on “Investigation on Flow Instabilities in Two Phase Microchannel Heat Sinks” from IIT Dhanbad.
  • M.Tech from Indian Institute of Technology Guwahati, Assam, in 2015.
  • B.Tech from Dr. A.P.J. Abdul Kalam Technical University, Lucknow, U.P., in 2010.

Experience:

  • Presently working as Registrar in ME Department in Dronacharya Group of Institutions, Greater Noida from 15th May 2019.
  • Worked as HOD in ME Department in Dronacharya College of Engineering, Khentawas, Farrukhnagar from Jan 2017 to May 2019.
  • Worked as Assistant Professor in Dronacharya College of Engineering, Khentawas, Farrukhnagar from 27th July, 2015 to Dec 2016.
  • Worked as Assistant Professor in Department of Mechanical Engineering of Shree Bankey Bihari Institute of Technology, Meerut from Aug 2012 to May 2013.
  • Worked as Assistant Professor in Department of Mechanical Engineering of Meerut Institute of Engineering and Technology, Meerut from July 2010 to July 2012.

Paper Presentation/Publication:

  • Mishra, V. K., Iqbal, A., Pandey, M., (2014), Effects of thermal property variations on the liquid flow variations in micro channel heat sink, International Symposium on Aspects of Mechanical Engineering and Technology for Industry, December 6-8, 2014, NERIST, India, Paper Id: AMETI2014-130.
  • Mishra, V. K., Iqbal, A., Sarma, S.K., (2015), Experimental and numerical investigation of single-phase fluid flow in minichannel array, 2nd Mechanical Engineering Graduate Research Symposium (MEGRES), March 21, 2015, IIT Bombay, Mumbai, India, Paper Id: 15MEGRES-TFE44.
  • Mishra, V. K., Iqbal, A., Pandey, M., (2014), Effects of thermal property variations on the liquid flow variations in micro channel heat sink, International Symposium on Aspects of Mechanical Engineering and Technology for Industry, December 6-8, 2014, NERIST, India, Paper Id: AMETI2014-130.

Conferences/ Seminars /Workshop:

  • Conducted one week programme on Preparing Student for Placement/ Job Interviews of Mechanical Engineering department from September 29 to October 5, 2016.
  • Organized two days’ Workshop on Racing Car Design conducted by Winginfotech in association with the IIT Madras on August 26-27 2016.
  • Attended AICTE sponsored Two Week Short Term Course on Research Methodology organised by NITTTR, Chandigarh from June 06-17, 2016.
  • Attended one day Workshop on COMSOL Multiphysics Modelling held on 26 May, 2016 at Eblem Hotel, Gurgaon.
  • Attended AICTE sponsored One Week Short Course on AutoCAD 2016 organised by NITTTR Chandigarh from March 14-18, 2016.
  • Attended AICTE sponsored One Week Short Course on Climate Change, Disaster Management and Sustainable Development organised by NITTTR Chandigarh from January 11-15, 2016.
  • Attended one day workshop on Entrepreneur Development, Innovation and Patenting organized at Dronacharya Group of Institutions, Greater Noida on January 7, 2016.
  • Attended ISTE sponsored Two Week Short Term Course on Engineering Physics organised by IIT Bombay from December 8-18, 2015.
  • Attended AICTE sponsored One Week QIP Programme on Advancement in Renewable Energy and Utilization Technologies organised by IIT Guwahati from March 2-6, 2015.
  • Attended an Eight Week course on “Multiphase Flow Reactors” at IIT Guwahati from January - March, 2015.

Professional Memberships :

  • Professional Member of IEEE
  • American Society of Civil Engineering(ASCE)-10884022
  • Society of Automotive Engineers (SAE) -7160311207
  • Institution of Mechanical Engineers (IMechE)- 80316003
  • Global Initiative of Academic Networks (GIAN)- 2015150526489
  • Institute of Research Engineers and Doctors (IRED)- SM10100054725
  • American Society of Thermal and fluids Engineers (ASTFE)
  • International Society Of Nano-Science And Nano –Technology (ISNSNT)
  • International Society Of Mechanical And Automobile Engineers (ISMAE)
  • International Academy for Science & Technology Education and Research (IASTER)

Mr. Shailesh Singh (Assistant Professor)

shailesh.singh@gnindia.dronacharya.info

Ph.D. from IIT-ISM Dhanbad

Specialization in Characterization of piston ring coating deposited by Physical Vapour Deposition

View Details

Educational Qualification:

  • PhD* (Mechanical Engineering) from IIT-ISM Dhanbad on ‘Characterization of piston ring coating deposited by Physical Vapour Deposition 2016-onwards.
  • M.Tech –Gold Medal (Production Engineering) from Delhi Technological University (DTU-DCE), Delhi 2013-2015.
  • B.Tech – (Mechanical Engineering) SDEC, Ghaziabad affiliated to Dr. APJ AKTU Lucknow, 2007-2011.

Experience:

  • Presently working as Assistant Professor (Mechanical Engineering Department) at Dronacharya Group of Institutions, Greater Noida.
  • Worked with Krishna Engineering College, Ghaziabad as Assistant Professor in Mechanical Engineering Department, also SAE Collegiate club funder and faculty advisor and Department coordinator NBA and NAAC Team along with FDPs,Seminar and Conference Coordinator along with the Member of proctorial Board, (August, 2016 to June, 2020).

Professional Credentials:

  • Certificate trainer on C Lnaguage programming UPTECH.
  • Certificate trainer on AUTOCAD.

Paper Published in International Journals:

  • Singh, S. K., Chattopadhyaya, S., Pramanik, A., & Kumar, S. (2018). Wear behavior of chromium nitride coating in dry condition at lower sliding velocity and load. The International Journal of Advanced Manufacturing Technology, 96(5-8), 1665-1675.
  • Singh, S. K., Chattopadhyaya, S., Pramanik, A., Kumar, S., & Basak, A. K. (2019). Effect of lubrication on the wear behaviour of CrN coating deposited by PVD process. International Journal of Surface Science and Engineering, 13(1), 60-78.
  • Singh, S. K., Chattopadhyaya, S., Pramanik, A., Kumar, S., & Basak, A. K. (2019). Wear behavior of chromium nitride coating under high loads and speeds. International Journal of Surface Science and Engineering, 13(4), pp. 263–282.
  • Singh, S. K., Chattopadhyaya, S., Pramanik, A., Kumar, S., & Gupta, N. (2018). Influence of Nano-particle on the Wear behaviour of Thin Film Coatings A Review. International Journal of Applied Engineering Research, 13(6), 4053-4058.
  • Kumar Singh, S., Tiwari, R. M., Kumar, S., & Kumar, S. (2018). Mechanical Properties and Microstructure of Al-5083 by TIG. Materials Today: Proceedings, 5(1), 819-822.
  • Kumar, S., Kumar, S., & Mishra, S. C. (2018). Processing and Characterization of Fly-ash Compacts. Materials Today: Proceedings, 5(2), 3396-3402.
  • Rashid, M., Yuvraj, N., &Singh, S. K. (2016). Micro Structural and Mechanical Behaviours of Nano-TiC-Reinforced AA6082 FSW Joints. Fusion of Science & Technology, 18-22.
  • Kumar, S., Singh, S. K., Kumar, J., & Murtaza, Q. (2018). Synthesis and Characterization of Al-alloy by Mechanical alloying. Materials Today: Proceedings, 5(2), 3237-3242.
  • Mohd. Rashid, Shailesh Kumar Singh, Sanjeev Kumar, Somnath Chattopadhyaya. (2018). Optimization of process parameters for tensile strength and micro hardness of friction stir welded AA6082 specimen using Response surface methodology (RSM). International Journal of Applied Engineering Research, 13(6), pp. 170-174.
  • ChandraYadaw, R., Singh, S. K., & Singh, S. C. S. K. R. (2018). Comparative study of surface coating for automotive application-A review. International Journal of Applied Engineering Research, 13(6), 17-22.
  • Yadaw, R. C., Singh, S. K., Chattopadhyaya, S., Kumar, S., & Singh, R. C. (2018). Tribological behavior of thin film coating-a review. International Journal of Engineering & Technology, 7(3), 1656-1663.
  • Singh, S. K., Chattopadhyaya, S., Pramanik, A., Kumar, S., & Basak, A. K. (2018). Tribological behaviour of chromium nitride coating. International Journal of Applied Engineering Research, 13(6), 23-25.
  • Shailesh Kumar Singh, Somnath Chattopadhyaya, Sanjeev Kumar. A. Pramanik (2017). Application of Fuzzy Logic Model for Study the Wear Behavior of Chrome Coating by Physical Vapour Deposition (PVD). International Journal of hybrid information and technology.DOI: 10.14257/ijhit.2017.10.5.04.
  • K. Satyajeet and K. Shailesh Singh comparative study on consolidation of SiC–Al and SiC–B4C–Al cermet,” Int. J. Trend Res. Dev., 3, URL: ISSN: 2394-9333.
  • Shailesh Kumar Singh , Satyajeet Kumar , Jay Shankar kumar ,Sitikantha Behera.(2016)Synthesis and Wear Behaviour of (Al, Cu) 3Ti Powder Blend by Mechanical Alloying .
  • Gupta, N., Singh, S. K., & Pandey, S. M. (2020). Tribological characterisation of thermal sprayed CrC alloyed coating–A review. Advances in Materials and Processing Technologies, 1-24.

Paper in International / National Conference:

  • Shailesh Kumar Singh, Somnath Chattopadhyaya1, A. Pramanik2 and Sanjeev Kumar3 Effect of temperature on the wear brehaviour of CrN coating deposited by PVD Process 6th International Conference on Production and Industrial Engineering 08 - 10 Jun 2019 Dr. B.R. Ambedkar National Institute of Technology Jalandhar, Jalandhar, India, CPIE-2019
  • Ramesh Chandra Yadaw, Shailesh Kumar Singh, Somnath Chattopadhyaya, Sanjeev Kumar, R.C.Singh Comparative study of surface coating for automotive applications-A Review ‘International Conference on Recent Trends and Innovations in Mechanical Engineering’. ICRTIME-2018 July 20-21.
  • Shailesh Kumar Singh, Somnath Chattopadhyaya, A. Pramanik, Sanjeev Kumar, A.K.Basak Tribological behaviour of chromium nitride coating ‘International Conference on Recent Trends and Innovations in Mechanical Engineering’. ICRTIME-2018 July 20-21.
  • Mohd. Rashid, Shailesh Kumar Singh, Somnath Chattopadhyaya, Sanjeev Kumar, Optimizations of process parameters for tensile strength and micro-hardness of friction stir welded AA6082 specimen using Response surface methodology (RSM) ‘International Conference on Recent Trends and Innovations in Mechanical Engineering’. ICRTIME-2018 July 20-21.
  • Shailesh Kumar Singh, Somnath Chattopadhyaya, A. Pramanik and Sanjeev Kumar Experimental investigation of CrN coating deposited by PVD Process 2nd INTERNATIONAL CONFERENCE on Computational & Experimental Methods in Mechanical Engineering Organized by Department of Mechanical Engineering G.L. Bajaj Institute of Technology & Management, Greater Noida May 3rd - 5th, 2019
  • Shailesh Singh, Somnath Chattopadhyaya, Sanjeev Kumar and Alokesh Pramanik “Application of Fuzzy Logic Model for study the wear behavior of Chrome Coating by physical vapour deposition (PVD)” International Conference on Advances in Computing and Data Sciences (ICACDS-2016) at Nov.11-12 2016.
  • Shailesh Kumar Singh, Somnath Chattopadhyaya, Sanjeev Kumar, Alokesh Pramanik Tribological behavior of surface coating by PVD-A Review International conference on “Evolutions in manufacturing: Technologies and Business Strategies for Global competiveness”. ICEM-2016 November 12-13-2016.
  • Singh S., “Microstructure Analysis of Piston Rings and Wear Resistance of Coating by Physical VapourDeposition”; ‘The 4th International Symposium on the Fusion science and Technologies 2015 (ISFT2015)’ on January 12-16th, 2015 in RUS, Huntra campus, Pra Nakhon Si Ayutthaya, Thailand.
  • Singh S., Murtaza Q., Walia R., Pandey S., Ahluwalia S., “Nano-Composite Classification, Deposition and Characterization Techniques – A Review”; TEQIP – II Sponsored National Conference on ‘Latest Developments in Materials, Manufacturing and Quality Control’ (ISBN 978-93-5196-055-3) on 19 – 20thFebruary, 2015 in Giani Zail Singh Punjab Technical University Campus, Bathinda, India.
  • Singh S., Rashid M., Murtaza Q.Yuvraj N., “Friction Stir Welding, Process Parameters and Materials Issues-A review”; ‘An International Conference & Exhibition on Cutting Edge Technological Challenges in Mechanical Engineering (CETCME – 2015)’ on 21 – 22nd March, 2015 in Noida Institute of Engineering and Technology, Greater Noida, India.
  • Singh S., Murtaza Q., Pandey S., Walia R., Rashid M., “Characterization of NiCr, CrC and Mo powders forthermal spray coatings”; ‘International Conference on Advances in Materials, Manufacturing and Applications (AMMA – 2015)’ on April 9 -11th, 2015 in National Institute of Technology, Tiruchirappalli, India.

Published Book Chapter:

  • Singh S.K., Chattopadhyaya S., Pramanik A., Kumar S. (2020) Effect of Temperature on the Wear Behaviour of CrN Coating Deposited by Physical Vapour Deposition. In: Tyagi M., Sachdeva A., Sharma V. (eds) Optimization Methods in Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore.

Paper Reviewer:

  • Editorial Board Member of International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE).
  • Reviewer at Tribology in Industry (SCOPUS).
  • Reviewer at Journal of Tribology (SCIE)

Research Interest:

  • Engine Tribology like Piston rings, piston head, and engine fuels.
  • Advance welding Technology like Friction stir welding of Al-Alloys.
  • Influence of Nano-particles on the Tribological studies
  • Productive research for MSMEs & Rural development.

Seminar/FDP/Workshop conducted/attended:

  • Organizing secretary at International conference “Optimization Techniques and Recent Innovations in Mechanical Engineering (ICOTRIME 2020).
  • Associate Organizing secretary at (CPIE- 2019).
  • Attended a 5-day Faculty development programme (FDP) on Computer Aided Design and Manufacturing (CAD/CAM) from 27-04-20 to 01-05-20 Organized by NITTTR, Chandigarh Mechanical Engineering.
  • Attended a 5-day Faculty development programme (FDP) on Recent Advances in Material Characterization from 23/05/2020to 28/05/2020 Organized by NITTTR, Chandigarh Mechanical Engineering.
  • Attended a 5-day Faculty development programme (FDP) on Precision manufacturing and circular economy(PCME-18) at Delhi Technological University (DCE), Delhi from 4-8 june 2018 sponsored by TEQIP-III.
  • Attended a 5-day Faculty development programme (FDP) on Advances in surface engineering at Delhi Technological University (DCE), Delhi from 1-5 may 2018 sponsored by TEQIP-III
  • Attended a 5-day Faculty development programme (FDP) on Six Sigma at Krishna. Engineering College Ghaziabad on 12-16 December 2016.
  • Attended a 5-day Faculty development programme (FDP) on Mechanics of solids at Krishna. Engineering College Ghaziabad on 05-09 June 2017 Sponsored by Dr. A.P.J.A.K.T.U.
  • Attended a 2-day Faculty development programme (FDP) at CATIA Krishna. Engineering College Ghaziabad on 12-16 December 2016
  • Organized 2-day workshop on “ROBOTRYST” in association with CETPA and IIT Delhi on Sept.21-22, 2015
  • Organized intercollegiate Wireless Robo race at Krishna engineering college.
  • Co-Organizer of 2-day workshop on “3-D Printing” in association with CETPA and IIT Delhi on Aug. 25-26, 2016.
  • Co-Organizer of departmental Tech-Guru event.
  • Attended a 2-day Faculty development programme (FDP) at R.D. Engineering College Ghaziabad on 6-7 February 2016.
  • Attended Hybrid Vehicle Challenge (HVC) event in Bhopal organized by Imperial Society of Innovative Engineering (ISIE) at 25-27 July 2016.where team SHAURYA of KEC win the following awards-
    • First Prize in best business plan and cost analysis
    • Lightest Vehicle Award
    • Overall fifth rank in Endurance round
  • Attend an International conference on Processing of materials minerals and energy at PACE institute of Technology, ongole Andhra Pradesh India on 26-30 July 2016.
  • Attended TEQIP-II Sponsored Faculty Development Programme on “Automation in Manufacturing (AIM – 2015)”, Delhi Technological University
  • Attended AICTE sponsored National Seminar on “Tools and Techniques used for thermal cooling” held in KIET, Ghaziabad
  • Diploma in Computer Programming in C from UPTECH, Ghaziabad
  • Pursued practical Training (8 weeks), Yamaha Motors India Private Limited, Greater Noida in Production & Quality Control.
  • Core Committee associate, Indian Society of Technical Education (ISTE) Delhi Section convention 2013, Delhi Technological University.
  • Core Committee, International Conference on Smart Technologies for Mechanical Engineering (STME – 2013), Delhi Technological University.
  • Profound social Volunteer at the biannual Blood donation camp in association with Indian Red Cross society, Delhi Technological University.

Some of the Projects undertaken/Guided:

    UG level
  • Mechanical Behaviour of al and Mg by TIG welding.
  • Design and fabrication of Hybrid vehicle (2015-2019)
  • Design and fabrication of Efficycle (2016, 2017).
  • Water purification by natural extracts.
  • Design and fabrication of compact drilling, punching and cutting machine.
  • PG Level -04 M Tech students
  • Effect of the sand on the tribological behaviour of steels.
  • Processing and characterization of Fly ash compacts.
  • Wear of Chrome plating.
  • Applications of Supply chain in food industry-A survey

Professional Membership:

  • Member of SAE
  • Member of ISIE
  • Member of IAENG

Special Competence:

  • Engine Tribology applications in Automobile sector.

Dr. Vineet Kumar Yadav (Assistant Professor)

vineetkumar.yadav@gnindia.dronacharya.info

Ph.D. from Indian Institute of Technology, Roorkee

Specialization in Production Engineering

View Details

Educational Qualification:

  • Ph.D. in Mechanical Engineering from Indian Institute of Technology, Roorkee, India, in 2019.
  • M.Tech in Mechanical Engineering with a specialization in Production Engineering from Motilal Nehru National Institute of Technology Allahabad, Payagraj, India, in 2015.
  • B.Tech (Honours) in Mechanical Engineering from Uttar Pradesh Technical University, Lucknow, India, in 2013.

Experience:

  • Presently Working as Assistant Professor in Mechanical Engineering at Dronacharya Group of Institutions from 16th January 2020.
  • Worked as Guest Faculty at Motilal Nehru National Institute of Technology (MNNIT), Allahabad, Prayagraj, Uttar Pradesh from July 2015 to Dec 2015.

Publications:

  • V. K. Yadav, P. Kumar, & A. Dvivedi, “Effect of Tool Rotation in near-dry EDM Process on Machining Characteristics of HSS,” Materials and Manufacturing Processes, 34 (7), pp. 779–790. 2019. DOI:10.1080/10426914.2019.1605171.
  • V. K. Yadav, P. Kumar, & A. Dvivedi, “Performance enhancement of rotary tool near-dry EDM of HSS by supplying oxygen gas in the dielectric medium,” Materials and Manufacturing Processes, 34(16), pp. 1832-1846, 2019. DOI: 10.1080/10426914.2019.1675889.
  • V. K. Yadav, P. Kumar, & A. Dvivedi, “Investigations on rotary tool near-dry electric discharge machining,” In Applications of Process Engineering Principles in Materials Processing, Energy and Environmental Technologies, Springer, Cham, pp. 327-334, 2017.
  • V. K. Yadav, Ramver, P. Kumar, & A. Dvivedi, (2020) “Investigation on the effect of input parameters on surface quality during rotary tool near-dry EDM,” In: A. K. Parwani and P. Ramkumar (eds.), Recent Advances in Mechanical Infrastructure, Lecture Notes in Intelligent Transportation and Infrastructure. Springer Nature Singapore Pte Ltd. DOI: 10.1007/978-981-32-9971-9_5
  • Ramver, V. K. Yadav, A. Dvivedi & P. Kumar, (2020) “Experimental investigation on surface morphology of micro-EDMed Ti-6Al-4V alloy,” In: A. K. Parwani and P. Ramkumar (eds.), Recent Advances in Mechanical Infrastructure, Lecture Notes in Intelligent Transportation and Infrastructure. Springer Nature Singapore Pte Ltd. DOI: 10.1007/978-981-32-9971-9_8
  • V. K. Yadav, A. K. Dubey, “Parametric Analysis of Laser Percussion Drilling of Yttria Stabilized Zirconia,” National Conference on Product Design and Manufacturing (NCPDM), Nov 21-22, 2015, MNNIT Allahabad, Prayagraj.
  • V. K. Yadav, P. Kumar, & A. Dvivedi, “Parametric investigations on near-dry Electric Discharge Machining,” 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), IIT Madras Chennai, Dec 06-09, 2017.
  • V. K. Yadav, P. Kumar, & A. Dvivedi, “Investigations on rotary tool near-dry Electric Discharge Machining,” The Minerals, Metals & Materials Society (TMS), San Diego, California, Feb 26- Mar 2, 2017.

Other Academic Services:

A reviewer of the International Journals such as:

  • Journal of Cleaner Production (Elsevier), 2019
  • Journal of Nanoparticle Research (Springer), 2019
  • Materials Research Express (IOPscience), 2019
  • Engineering Research Express (IOPscience), 2019
  • Advanced Powder Technology (Elsevier), 2019
  • Recent Patents on Mechanical Engineering, 2019, etc.

Seminar / Workshop Attended:

  • Attended a Short Term Course on “CAD/CAM and Advanced Machining 2014,” held on July 01-05, 2014 in MNNIT Allahabad, Prayagraj.
  • Attended a National Workshop on “Fatigue and Fracture of Engineering Materials and Structures,” held on December 17-18, 2014 in Department of Mechanical Engineering, MNNIT Allahabad, Prayagraj.
  • Attended an “Author Workshop on Book Publishing,” organized by Mahatma Gandhi Central Library, IIT Roorkee on 26th September 2016.
  • Attended a “Workshop on Improving Awareness About Plagiarism,” organized by Mahatma Gandhi Central Library, IIT Roorkee, on 31st October 2018.

Area of Interest:

  • Advanced Manufacturing Processes.
  • Hybrid Machining Processes.
  • Production Engineering.

Special Competency:

  • Qualified GATE exam in 2013.

Mr. Manish Kumar Mishra (Assistant Professor)

manishkumar.mishra@gnindia.dronacharya.info

M. Tech. from National Institute of Technology Calicut

Specialization in Machine Design

View Details

Educational Qualification:

  • M. Tech. in Machine Design from National Institute of Technology Calicut, Kerala, in 2016.
  • B. Tech. in Mechanical Engineering from Dr. A.P.J. Abdul Kalam Technical University, Lucknow, U.P., in 2013.

Teaching Experience:

  • Presently working as Assistant Professor in Mechanical Engineering Department in Dronacharya Group of Institutions, Greater Noida from 01st July 2020.
  • Worked as an Assistant Professor in Mechanical Engineering Department in Dronacharya College of Engineering, Khentawas, Farrukhnagar from 01st Aug 2016 to 14th Dec 2019.

Paper Publications:

  • Yadav Saurabh, Mishra Manish Kumar, Mishra Vineet : Analytical and Experimental Characterization of friction force in belt motion, Communication and Computing Systems- Prasad et al. (eds), Taylor & Francis Group, London, ISBN 978-0-367-00147-6, pp. 601-606,(2019).

Workshop / Certifications / Seminars:

  • AutoCAD from INDO DANISH TOOL ROOM, Jamshedpur. (June 17 – June 30, 2011)
  • CATIA V5R18 from INDO DANISH TOOL ROOM, Jamshedpur. (June 17 – July 15, 2011)
  • CAD/CAM from MSME-TDC (PPDC), Meerut. (October 15,2012 – January 12, 2013)
  • Attended Three-Day Workshop on Product Design organized by the Design Innovation Centre, National Institute of Technology Calicut, during 26-28 February, 2016
  • 43rd NRDC Meritorious Invention Awards Ceremony & Conference on “Leveraging Innovation Ecosystem for Accelerating Start-ups” organized by National Research Development Corporation (An Enterprise of DSIR, Ministry of Science and Tech., Govt. of India), on 24 & 25 March 2017.
  • International Conference on “PPP Model for Waste to Worth Projects” organized by Confederation of Indian Industry (CII), on November 30, 2017.
  • Four weeks Faculty Development Program (FDP101x) on Foundation program in ICT for Education conducted by Indian Institute of Technology, Bombay from August 3-September 7, 2017.

Special Competency:

  • GATE Qualified in 2016
  • GATE Qualified in 2014

Harshit Kumar (Assistant Professor)

harshit.kumar@gnindia.dronacharya.info

M.Tech from G.B Pant University of Agriculture & Technology, Pantnagar

Specialization in Design & Production Engineering

View Details

Educational Qualification:

  • M.Tech (Design & Production Engineering) from G.B Pant University of Agriculture & Technology, Pantnagar, in 2015.
  • B.Tech (Mechanical Engineering) from R.K.G.E.C., U.P.T.U Lucknow, in 2012.

Experience:

  • Presently working as Assistant Professor in Mech Department at Dronacharya Group of Institutions from 25th July 16.
  • Worked as Assistant Professor in Mechanical Department in International College of Engineering, Ghaziabad From 15th July 2015 to June 2016.
  • Worked as Lecturer in International College of Engineering, Ghaziabad From 30th July 2012 to 4th August 2013.

Workshops/Seminars/Conferences:

  • Attended All India Seminar on ‘Emerging Technology for Sustainable Resource Management’, organized by Institutions of Engineers (India), Pantnagar from 12th to 14th June 2014.

Special Competency:

  • Qualified in GATE 2016
  • Qualified in GATE 2015
  • Qualified in GATE 2013
  • Qualified in GATE 2012

Mr. Vishnu Kuntal (Assistant Professor)

vishnu.kuntal@gnindia.dronacharya.info

Studying Ph. D. from Aligarh Muslim University

Specialization in Ergonomics

View Details

Educational Qualification:

  • Pursuing Ph. D. from Aligarh Muslim University in Ergonomics, Department of Mechanical Engineering.
  • M. Tech. in Engineering Systems with 88.32 % from Dayalbagh Educational Institute, Agra in 2016.
  • B. Tech. in Mechanical Engineering with 77.32 % from UPTU, Uttar Pradesh, in 2012.

Professional Experience:

  • Presently working as Assistant Professor in Mechanical Department of Dronacharya Group of Institutions, Greater Noida from 16th January, 2018.
  • Worked as Assistant Professor in Mechanical Department of Dronacharya College of Engineering, Gurgaon from 1st August, 2018 to 31 December 2018.
  • Worked as Assistant Professor in Department of Mechanical Engineering, Ideal Institute of Technology, Ghaziabad from 12th August 2016 to 30th July 2018.

Research Interest:

  • Design of Hybrid Electrical Vehicle works on Solar energy, Sound energy and Shock energy during B. Tech. project.
  • Worked on Six Sigma Technique used to reduce Casting Defects.
  • Design of a cold Storage for Improved Coefficient of Performance.
  • Worked on Continuously Varying Transmission.

Participation and Organization in/of National & International Conferences / Workshops/Seminars:

  • Organize "After Final Year" Seminar in June, 2017 to deliver the information about Career Guidance, Competitive Exams, Private Companies, Mechanical Softwares.
  • Conducted a Mock test based on “Gate Pattern” on “National Science Day” on 5th September 2016, Ghaziabad.
  • Initiate Digital Study of Technical section with the help of You Tube, Animation videos, Previous year question papers of IES, GATE, PSU on the Projector presentations.

Special Competency:

  • Qualified GATE exam in 2012.
  • Qualified GATE exam in 2013.
  • Qualified GATE exam in 2014.
  • Qualified GATE exam in 2015.
  • Qualified GATE exam in 2016.

Mr. Ajay Singh Verma (Assistant Professor)

ajaysinghverma@gnindia.dronacharya.info

Ph. D Thesis submitted at Punjab Engineering College, Chandigarh

Specialization in Production Engineering

View Details

Educational Qualification:

  • Ph. D. from Punjab Engineering College (Deemed to be university), Chandigarh.
  • M. Tech. from Punjab Engineering College (Deemed to be university), Chandigarh.
  • B. Tech. from Kurukshetra University, Kurukshetra.

Experience:

  • Presently Working as Assistant Professor in ME Department of Dronacharya Group of Institutions, Greater Noida from February 2018.
  • Worked as an Assistant Professor in Sharda University, Gautam Buddha Nagar, Greater Noida.
  • Worked as maintenance cum project engineer in project with Confidence Petroleum India Ltd. Atchutapuram (Visakhapatnam) under UTL group, is manufacturing unit of CNG & LPG Cylinders.
  • Worked as a Maintenance cum Project Engineer in Project with Jay Fe Cylinders Ltd. (Minda Group) Bawal ( Rewari ) under UTL group, is manufacturing plant of CNG cylinders.
  • Worked as a shift in charge in CGL, CCL, CTL, Corrugation line, Mechanical (maintenance) department with Vardman Industries Ltd., Rajpura (Patiala) under UTL group.

Paper Presented/Publications:

  • Verma, A. S., Suri, N. M., & Kant, S. (2017). Applications of bauxite residue: A mini-review. Waste Management & Research, 35(10), 999-1012.
  • Kant, S., & Verma, A. S. (2017). Stir Casting Process in Particulate Aluminium Metal Matrix Composite: A Review. International Journal of Mechanics and Solids, 9(1), 61-69.
  • Jawalkar, C. S., Verma, A. S., & Suri, N. M. (2017). Fabrication of aluminium metal matrix composites with particulate reinforcement: a review. Materials Today: Proceedings, 4(2), 2927-2936.
  • Verma, A. S., & Suri, N. M. (2015). Corrosion behavior of aluminum base particulate metal matrix composites: A review. Materials Today: Proceedings, 2(4-5), 2840-2851.
  • Singh, J., Suri, N. M., & Verma, A. (2015). Affect of mechanical properties on groundnut shell ash reinforced AL6063. International Journal for Technological Research in Engineering, 2, 2619-2623.
  • Verma, A. S., Kant, S., & Suri, N. M. (2013). Modelling of Process variables for fly ash based Al-6063 composites using Artificial Neural Network. International Journal of Scientific and Research Publications, 3(5), 1-5.
  • Verma, A. S., Suri, N. M., & Kant, S. (2012). Effect of Process parameter of AL-6063 based fly ash composites using Taguchi. International Journal of Applied Engineering Research, 7(11), 2012.

Book/Chapter Publication:

  • Verma, A.S. (2017a). Corrosion mechanism and Inhibitors for Al based particulate metal matrix composite (APMMCs). In Esther Hart (Eds.). Corrosion Inhibitors principles, mechanisms and applications (pp. 105-115). New York, Nova Science Publishers, Inc.

National & International Conference/Workshops/Seminars:

  • Attended short term course on Advanced Materials & Characterization organized by Department of Physics, NIT Kurukshetra 08-12 June 2015.
  • Attended short term course on Design of Experiments & its Applications in Research organized by Department of Production & Industrial Engineering, PEC University of Technology Chandigarh on 12 -16 Jan 2015.
  • Attended FDP on Health, Environment & Nanotechnology organized by Dr. S.S. Bhatnagar University of Chemical Engineering & Technology, Punjab University on 04-09 Aug 2014.
  • Attended FDP on Vehicular & Transport Ergonomics organized by Center of Excellence in Industrial & Product Design, PEC University of Technology Chandigarh on 20-24 April 2014.
  • Attended short term course on Welded Structure Design & Quality Control organized by Department of Mechanical & Industrial Engineering, IIT Roorkee on 14-16 Dec 2011.

Special Competency:

  • MHRD Assistantship during M.E. and Ph.D Program., GATE qualified.
  • GATE qualified.

Ms. Akansha Dalakoti (Assistant Professor)

akansha.dalakoti@gnindia.dronacharya.info

M.Tech from G.B Pant University of Agriculture & Technology, Pantnagar

Specialization in Thermal Engineering

View Details

Educational Qualification:

  • M. Tech. in Thermal Engineering from G. B. Pant University of Agriculture & Technology, Pantnagar, in 2015.
  • B. Tech. in Mechanical Engineering from Kumaon Engineering College, Dwarahat in 2010.

Experience:

  • Presently working as Assistant Professor in Mechanical Department at Dronacharya Group of Institutions from 18th July 2018.
  • Worked as Assistant Professor in Mechanical Department in RNS Institute of Technology, Bengaluru from 13th February 2017 to 3rd January 2018.
  • Worked as Lecturer in Amrapali Group of Institutes from 25th August 2010 to 27th July 2013.

Papers Presented:

  • Presented a paper on “Parametric study of Rock Bed Heat Storage System” in the SRMS International Conference on Science and Technology-2015.

Workshops/Seminars/Conferences:

  • Attended One Week Faculty Development Programme from 22nd January 2018 to 27th January 2018 on “Computational Fluid Dynamics” organized by Department of Mechanical Engineering, SJB Institute of Technology, Bengaluru.

Special Competency:

  • Qualified in GATE 2012
  • Qualified in GATE 2015
  • NPTEL elite Certification in following subjects:
    1. Fluid Mechanics.
    2. Refrigeration & Air Conditioning.

Mr. Manik Mittal (Assistant Professor)

manik.mittal@gnindia.dronacharya.info

M.Tech from IIT (ISM), Dhanbad

Specialization in Thermal Engineering

View Details

Educational Qualification:

  • M.Tech in Thermal Engineering from IIT (ISM), Dhanbad in 2017.
  • B.Tech in Mechanical Engineering with Distinction from Maharishi Markandeshwar University, Mullana in 2013.

Experience:

  • Presently working as an Assistant Professor (Mechanical Engineering Department)at Dronacharya Group of Institutions, Greater Noida from 20th July 2017.
  • Worked as Quality control Engineer in Hari Om Enterprises.
  • Worked as Quality control Engineer in SOS Oil seals Pvt. Ltd.
  • Worked as Senior Marketing Engineer in Neo Petcon India Pvt. Ltd.

Paper Published in International Journals:

  • D. Kumar, M. Mittal and S. Sen. Modification of response and suppression of vortex-shedding in Vortex-Induced Vibrations of an elliptic cylinder. International Journal of Heat and Fluid Flow, 2018, vol. 71, pp. 406-419. [SCI Journal, ELSEVIER, Impact Factor – 1.873].
  • A. Kumar, M. Mittal. Intelligent household water storage tank filling system. International Journal of Engineering and Advanced Technology, 2018, ISSN: 2249-8958, vol. 7, pp- 36-39.
  • A. Bhardwaj, D. Yadav, M. Mittal. Alcohol detector with auto ignition off system. International Journal of Engineering and Advanced Technology, 2018, ISSN: 2249-8958, vol. 7, pp- 32-35.

Paper in International / National Conference:

  • M. Mittal and S. Sen. Transverse-only vibrations of an elliptic cylinder with major axis parallel to flow. In Proceedings of Conference of Mechanical Engineering and Technology, IIT (BHU), Varanasi, India, 8th April 2017.

Academic Award:

  • Winner of 1st Prize and cash award for Best oral Research Paper Presentation entitled “Free Vibrations of an elliptic cylinder at low Reynolds number” in Research Scholar’s Day held at National Institute of Technology (NIT), Delhi on 9th December 2017.

Research Interest:

  • Computational Fluid Dynamics.
  • Bluff body Aerodynamics.
  • Fluid-Structure interactions.

Workshop / FDP/ Seminars/Conferences attended:

  • Attended 8 days Faculty Development Program on “Universal Human values and Professional Ethics” organized by TEQIP – III and conducted by Value Education Cell, AKTU, Lucknow from 10th Jan – 17th Jan 2018.
  • Qualified Faculty Development Program (FDP-101X) on “Foundation Program in ICT for Education” conducted by Indian Institute of Technology, Bombay from 3rd August to 7th September 2017 (Considered as 2 week equivalent FDP course).
  • Presented paper in “Research Scholars Day” held at National Institute of Technology, Delhi on 9th December 2017.
  • Attended International Conference on PPP model for waste to worth projects organized by CII (Confederation of Indian Industry) on 30th November 2017, New Delhi.
  • Attended NPTEL Workshop by IIT Madras on 20th Jan 2018.
  • Attended one day webinar on Continuous Innovation – Key to Success by Deepak Daftari (CEO, esiksha.com).

Projects Undertaken / Guided at UG level:

  • DST sponsored “Automatic inbuilt pneumatic Jack system”.
  • Intelligent household water storage tank filling system.
  • Alcohol detector with auto ignition off system.